LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2009 >> Mustang Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Electronic Engine Control) >> Removal And Installation >> Throttle Position (TP) Sensor >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Throttle Position (TP) Sensor: Removal

WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the throttle position (TP) sensor electrical connector.
    2. CAUTION: Failure to remove the throttle position (TP) sensor screws in the following manner will result in damage to the screws. First loosen the screws 1-2 full turns using a hand tool and then use a suitable high-speed driver to complete the removal.
  2. Remove and discard the 2 screws and the TP sensor.
scientia non olet · About LEMON Manuals