Throttle Body: Removal
- Remove the Air Cleaner (ACL) outlet pipe. For additional information, refer to INTAKE AIR DISTRIBUTION & FILTERING article.
- Disconnect the crankcase ventilation tube quick connect coupling from the ACL outlet pipe-to-Throttle Body (TB) adapter. For additional information, refer to FUEL SYSTEM - GENERAL INFORMATION article.
- Release the clamp and remove the bolt and the air intake resonator assembly.
- Remove the 3 ACL outlet pipe-to- TB adapter bolts.
- Remove the ACL outlet pipe-to- TB adapter.
- Disconnect the Electronic Throttle Control (ETC) electrical connector.
- Disconnect the Throttle Position (TP) sensor electrical connector.
- Remove the 4 bolts, the vibration damper and the TB
assembly.
- Discard the TB O-ring seal.