LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2009 >> Escape Base, 2.5 7, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (MULTIFUNCTION Electronic Modules) >> Removal & Installation >> Lighting Control Module (LCM) >> Removal & Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation

WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Prior to removal of the module, it is necessary to upload module configuration information to a scan tool. This information needs to be downloaded into the new module once installed. For additional information, refer to MODULE CONFIGURATION article.
    NOTE: This step is necessary only if the lighting control module (LCM) is being replaced.
  1. Upload the module configuration information from the LCM into the scan tool. For additional information, refer to MODULE CONFIGURATION article.
    2. NOTE: A new LCM is delivered in a manufacturing mode with a pre-set DTC of B2477. This DTC will clear when the module has been successfully configured (or programmable module installation [PMI]). DTC B2477 may need to be cleared after a successful configuration (or PMI).
  2. Remove the pin-type retainers and position the LH instrument panel lower insulator aside.
  3. Disconnect the courtesy lamp and remove the LH instrument panel lower insulator.
  4. Remove the accelerator pedal. For additional information, refer to ACCELERATION CONTROL article.
  5. Remove the 2 screws and position the LCM aside.
  6. Release the locking tabs, disconnect the electrical connectors and remove the LCM.
    7. NOTE: Once the new module is installed, it is necessary to download the module configuration information from the scan tool into the new module. For additional information, refer to MODULE CONFIGURATION article.
  7. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals