LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2009 >> Escape 2WD V6-3.0L >> Repair and Diagnosis >> Heating and Air Conditioning >> Control Assembly >> Service and Repair >> Passenger Zone Valve
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Passenger Zone Valve




Passenger Zone Valve













Removal and Installation

NOTE: Installation of a new receiver/drier is not required when repairing the A/C system, except when there is physical evidence of contamination from a failed A/C compressor or damage to the receiver/drier.

1. Recover the refrigerant.

2. Disconnect the passenger zone valve electrical connector.

3. Disconnect the 2 passenger zone valve fittings.
- Discard the O-ring seals.

- To install, tighten to 17 Nm (150 lb-in).

4. Remove the passenger zone valve bracket nut.
- To install, tighten to 7 Nm (62 lb-in).

5. Remove the passenger zone valve.

6. To install, reverse the removal procedure.
- Install new O-ring seals.

- Lubricate the refrigerant system with the correct amount of clean PAG oil.

7. Evacuate, leak test and charge the refrigerant system.
scientia non olet · About LEMON Manuals