Spring Lock Couplings: Connect

WARNING: This page is about a different car, the 2009 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

Inspect and clean both spring lock coupling ends.

NOTE: Make sure the fuel tube clicks into place when installing the tube. To make sure that the fuel tube is fully seated, pull on the tube.

NOTE: Lubricate the spring lock coupling with clean engine oil to ease assembly.

Fig 1: Aligning Fuel Tube Spring Lock Coupling

Courtesy of FORD MOTOR CO.

Align and push the fuel tube spring lock coupling until a click is heard.
Pull on the spring lock coupling to make sure it is fully seated, then install the fuel tube safety clip on the male end.

Fig 2: Locating Spring Lock Coupling
Courtesy of FORD MOTOR CO.
Connect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES article.