Powertrain Control Module (PCM): Removal
WARNING: This page is about a different car, the 2009 Ford RV Cutaway, 2009 Ford Econoline, 2009 Ford E450 Super Duty, and 2009 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- If servicing the PCM, connect the scan tool to the vehicle. Allow the scan tool to identify the vehicle and obtain configuration data.
- All programmable module information will automatically be retrieved by the VCM .
- Disconnect the 3 PCM electrical connectors.
- Remove the 2 retaining nuts and PCM.
NOTE:
Refer to the
INTRODUCTION - GASOLINE MODELS
article for correct Vehicle Communication Module (VCM) hook-up procedure.