Removal And Installation
WARNING: This page is about a different car, the 2009 Mercury Sable, 2009 Ford Taurus X, and 2009 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
Taurus/Sable
- Remove the instrument cluster finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE article.
- Remove the 3 lower steering column cover screws.
- Remove the lower steering column cover.
- Remove the 3 lower steering column shroud screws.
- Remove the lower steering column shroud.
- Disconnect the in-vehicle temperature sensor electrical connector.
- Remove the in-vehicle temperature sensor.
- To install, reverse the removal procedure.
Taurus X
All vehicles