Removal And Installation

Vehicles with 5.4L 4V engine 

1. Remove the battery tray. For additional information, refer to BATTERY, MOUNTING AND CABLES article.

All vehicles 

2. Disconnect the EGR system module tube-to-EGR system module fitting.
   • To install, tighten to 39 Nm (29 lb-ft) (4.0L SOHC).
   • To install, tighten to 42 Nm (31 lb-ft) (5.4L 4V).
3. Disconnect the EGR system module tube-to-exhaust manifold fitting and remove the tube.
   • To install, tighten to 39 Nm (29 lb-ft) (4.0L SOHC).
   • To install, tighten to 42 Nm (31 lb-ft) (5.4L 4V).
4. To install, reverse the removal procedure.