LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2008 >> Expedition 4WD V8-5.4L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Camshaft Position Sensor >> Service and Repair
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Camshaft Position Sensor: Service and Repair

CAMSHAFT POSITION (CMP) SENSOR







Removal and Installation

LH camshaft position (CMP) sensor
1. Remove the air cleaner outlet pipe.

All CMP sensors
2. Disconnect the CMP sensor electrical connector.
3. Remove the bolt and the CMP sensor.
- To install, tighten to 10 Nm (89 lb-in).
- Lubricate the O-ring seal with clean engine oil prior to installation.

4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals