LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2008 >> Expedition 4WD V8-5.4L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Cellular Phone >> Communications Control Module >> Service and Repair >> Audio Digital Signal Processing (DSP) Module
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Audio Digital Signal Processing (DSP) Module

AUDIO DIGITAL SIGNAL PROCESSING (DSP) MODULE


DSP Module Lower Attachment:






DSP Module Upper Attachment:






DSP Module Removal Routing:






Removal and Installation
1. Remove the audio control module (ACM).
2. Remove the necessary attachments and move the center console 5 cm (2.0 in) towards the rear of the vehicle.
3. Disconnect the audio digital signal processing (DSP) module electrical connectors.
4. Remove the 2 lower DSP module nuts.
- To install, tighten to 9 Nm (80 lb-in).

5. CAUTION: The DSP module is heavy. Be sure to support the amplifier during removal, or damage to the vehicle may occur.

Remove the 2 upper DSP module nuts.
- To install, tighten to 9 Nm (80 lb-in).

6. Remove the DSP module.
- Route the DSP module down and towards the passenger side of the vehicle.

7. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals