LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2008 >> Edge AWD V6-3.5L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Camshaft Position Sensor >> Service and Repair
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Camshaft Position Sensor: Service and Repair

CAMSHAFT POSITION (CMP) SENSOR







Removal and Installation

RH sensor
1. Remove the air cleaner outlet pipe.

LH sensor
2. Remove the air cleaner assembly.

Both sensors
3. Disconnect the camshaft position sensor (CMP) electrical connector.
4. Remove the bolt and the CMP sensor.
- To install, tighten to 10 Nm (89 lb-in).

5. NOTE: Lubricate the CMP O-ring seal with clean engine oil.

To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals