LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Taurus SEL >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> In-Vehicle Servicing >> Digital Transmission Range (TR) Sensor >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Digital Transmission Range (TR) Sensor: Removal

  1. Place the transaxle range selector lever in NEUTRAL.
    2. Fig 1: Placing Transaxle Range Selector Lever In NEUTRAL
    GF0020149Courtesy of FORD MOTOR CO.
  2. Disconnect the mass air flow (MAF) sensor and the breather tubes.
    3. Fig 2: Locating Mass Air Flow (MAF) Sensor And Breather Tubes
    GF0019965Courtesy of FORD MOTOR CO.
  3. Remove the engine air cleaner.
    4. Fig 3: Locating Engine Air Cleaner Lid
    GF0020150Courtesy of FORD MOTOR CO.
  4. Remove the air filter assembly.
    5. Fig 4: Locating Air Filter Assembly
    GF0020151Courtesy of FORD MOTOR CO.
  5. Disconnect the TR sensor electrical connector.
    6. Fig 5: Identifying Digital Transmission Range (TR) Sensor Electrical Connector
    GF0020152Courtesy of FORD MOTOR CO.
  6. Remove the shift cable and manual control lever.
    1. Remove the manual control lever nut.
    2. Remove the shift cable and manual control lever.
    7. Fig 6: Identifying Shift Cable And Manual Control Lever
    GF0020153Courtesy of FORD MOTOR CO.
  7. Remove the digital TR sensor bolts and the TR sensor.
    8. Fig 7: Locating Digital TR Sensor Bolts
    GF0020154Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals