Instrument Cluster DTCS
INSTRUMENT CLUSTER DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Perform Test |
|---|---|---|
| B1202 | Fuel Sender Circuit Open | Go to Pinpoint Test B . |
| B1204 | Fuel Sender Circuit Short to Ground | Go to Pinpoint Test B . |
| B1205 | EIC Switch-1 Assembly Circuit Failure | VERIFY that the instrument cluster bezel is aligned correctly and the SELECT/RESET button is not binding. REPAIR as necessary. If the switch is not binding, INSTALL a new instrument cluster. REFER to Instrument Cluster (IC) . |
| B1317 | Battery Voltage High | REFER to CHARGING SYSTEM - GENERAL INFORMATION article. |
| B1318 | Battery Voltage Low | REFER to CHARGING SYSTEM - GENERAL INFORMATION article. |
| B1319 | Driver Door Ajar Circuit Failure | REFER to INTERIOR LIGHTING article. |
| B1327 | Passenger Door Ajar Circuit Failure | REFER to INTERIOR LIGHTING article. |
| B1342 | ECU Is Faulted |
NOTE:
If other DTCs are present, REPAIR them before installing a new component. CLEAR the DTCs. REPEAT the self-test. If DTC B1342 is retrieved again, INSTALL a new instrument cluster. REFER to Instrument Cluster (IC)
. |
| B1352 | Ignition Key-In Circuit Failure | REFER to WARNING DEVICES article. |
| B1360 | Ignition Run/Acc Circuit Open | Go to Pinpoint Test A . |
| B2143 | NVM Memory Failure | INSTALL a new instrument cluster. REFER to Instrument Cluster (IC) . |
| B2477 | Module Configuration Failure | ATTEMPT to configure the instrument cluster again. CLEAR the DTCs. REPEAT the self-test. If DTC B2477 is retrieved again, INSTALL a new instrument cluster. REFER to Instrument Cluster (IC) in this section. |
| B2658 | Wait to Start Warning Indicator Circuit Open | CLEAR the DTCs. REPEAT the self-test. If DTC B2658 is retrieved again, INSTALL a new instrument cluster (IC). REFER to Instrument Cluster (IC) . |
| B2982 | Park Brake Switch Input Circuit Open | Go to Pinpoint Test K . |
| U0002 | High Speed CAN Communication Bus Performance | CLEAR the DTCs. REPEAT the self-test. If DTC U0002 returns, REFER to MODULE COMMUNICATIONS NETWORK article. |
| U0011 | Medium Speed CAN Communication Bus Performance | CLEAR the DTCs. REPEAT the self-test. If DTC U0011 returns, REFER to MODULE COMMUNICATIONS NETWORK article. |
| U1900 | CAN Communication Bus Fault - Receive Error | CLEAR the DTCs. REPEAT the self-test. If DTC U1900 returns, REFER to MODULE COMMUNICATIONS NETWORK article. |
| U2023 | Fault Received From External Node | CLEAR the DTCs. REPEAT the self-test. If DTC U2023 returns, REFER to MODULE COMMUNICATIONS NETWORK article. |
| U2050 | No Application Present | CLEAR the DTCs. REPEAT the self-test. If DTC U2050 returns, REFER to MODULE CONFIGURATION article. |
| All other DTCs | - | REFER to MULTIFUNCTION ELECTRONIC MODULES article. |