Torque Specifications
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Case-to-chain cover (10 mm socket size) | 30 | 22 | - |
| Case-to-chain cover (8 mm socket size) | 13 | 10 | - |
| Case-to-stator support | 13 | 10 | - |
| Chain cover-to-case (10 mm socket size) | 30 | 22 | - |
| Chain cover-to-case (24 mm socket size) | 28 | 21 | - |
| Chain cover-to-case (13 mm socket size) | 41 | 30 | - |
| Chain cover-to-case bolts (8 mm socket size) | 13 | 10 | - |
| Cooler line fitting at transaxle | 29 | 21 | - |
| Detent spring-to-chain cover | 11 | 8 | - |
| Driven sprocket support bolts | 25 | 18 | - |
| Electronic pressure control (EPC) and torque converter clutch (TCC)-to-pump body | 12 | 9 | - |
| Engine anti-roll bracket-to-cylinder head bolt | 30 | 22 | - |
| Engine mount bolts | 90 | 66 | - |
| Engine oil pan-to-transaxle case bolt | 48 | 35 | - |
| Filler tube-to-case bolt | 13 | 10 | - |
| Fluid pan-to-case (lower reservoir) | 12 | 9 | - |
| Ground strap nut | 20 | 15 | - |
| Hood latch | 12 | 9 | - |
| Lower engine-to-transaxle bolts | 90 | 66 | - |
| Lower control arm pinch bolt | 90 | 66 | - |
| Lube tube support bracket bolts | 11 | 8 | - |
| Main control cover bolts (10 mm socket size) | 29 | 21 | - |
| Main control cover-to-chain cover (upper reservoir) (8 mm socket size) | 12 | 9 | - |
| Manual control lever nut | 13 | 10 | - |
| Neutral/drive accumulator retaining bolt | 11 | 8 | - |
| Output shaft speed (OSS) sensor retaining bolt | 11 | 8 | - |
| Overdrive servo cover-to-case | 13 | 10 | - |
| Park rod abutment bolts | 28 | 21 | - |
| Power steering line-to-subframe bolts | 6 | - | 53 |
| Power steering rack nuts | 175 | 129 | - |
| Pressure tap plug for chain cover and pump body | 9 | - | 80 |
| Pump assembly-to-main control | 13 | 10 | - |
| Pump cover-to-pump body | 13 | 10 | - |
| Reverse clutch locator bolt | 11 | 8 | - |
| Reverse clutch locator locknut | 54 | 40 | - |
| RH engine mount-to-transaxle case bolts | 62 | 46 | - |
| RH engine mount-to-transaxle case nut | 62 | 46 | - |
| Separator plate-to-pump body and valve body | 11 | 8 | - |
| Shaft cable stud chain cover-to-case | 31 | 23 | - |
| Starter motor | 25 | 18 | - |
| Subframe-to-body bolts | 175 | 129 | - |
| Sway bar retaining bolts | 62 | 46 | - |
| Sway bar link nuts | 103 | 76 | - |
| Tie-rod nut | 80 | 59 | - |
| Torque converter-to-flexplate nuts | 47 | 35 | - |
| Transaxle shift cable bracket retaining nut and bolts | 35 | 26 | - |
| Transaxle support insulator bracket-to-structural pan bolts | 62 | 46 | - |
| Transaxle support insulator-to-structural pan bracket bolt | 90 | 66 | - |
| Transaxle support insulator-to-frame nut | 90 | 66 | - |
| Transmission inspection cover bolts | 10 | - | 89 |
| Transmission range sensor-to-case | 11 | 8 | - |
| Turbine shaft speed (TSS) sensor retaining bolt | 11 | 8 | - |
| Upper transaxle-to-engine bolts | 90 | 66 | - |
| Upper fluid filler tube-to-case bolt | 14 | 10 | - |
| Valve body-to-pump bolts | 13 | 10 | - |
| Valve body/solenoid-to-chain covera | - | - | - |
a Refer to the procedure.