September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Fuel Pump Driver Module (FPDM)
Courtesy of FORD MOTOR CO.
| Item |
Part Number |
Description |
| 1 |
14A464 |
Fuel pump driver module (FPDM) electrical connector |
| 2 |
W805320 |
FPDM nut (2 required) |
| 3 |
9D372 |
FPDM |
- Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES
article.
- Pull up the rear seat.
- Position the floor covering to one side.
- Disconnect the fuel pump driver module (FPDM) electrical connector.
- Remove the 2 nuts and the FPDM.
- To install, tighten to 5 Nm (44 lb-in).
- To install, reverse the removal procedure.