October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Fuel Pump Driver Module (FPDM)
Courtesy of FORD MOTOR CO.
| Item |
Part Number |
Description |
| 1 |
14A464 |
Fuel pump driver module (FPDM) electrical connector |
| 2 |
W805320 |
FPDM nut (2 required) |
| 3 |
9D372 |
FPDM |
- Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES
article.
- Pull up the rear seat.
- Position the floor covering to one side.
- Disconnect the fuel pump driver module (FPDM) electrical connector.
- Remove the 2 nuts and the FPDM.
- To install, tighten to 5 Nm (44 lb-in).
- To install, reverse the removal procedure.