LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Crown Victoria Base, 4.6 W >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Removal And Installation >> Heated Seat Module >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Heated Seat Module: Installation

  1. Install the heated seat module in the mounting bracket. Verify that the locking tab is correctly seated.
    2. Fig 1: Heated Seat Module Locking Tab
    GF0013122Courtesy of FORD MOTOR CO.
  2. Connect the heated seat module electrical connector.
    3. Fig 2: Heated Seat Module Electrical Connector
    GF0013120Courtesy of FORD MOTOR CO.
  3. Install the affected seat. For additional information, refer to Seat - Front .
  4. Repower the SRS. For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering in the General Procedures portion of SUPPLEMENTAL RESTRAINT SYSTEM article.
scientia non olet · About LEMON Manuals