LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2006 >> Focus ZX4 ST >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamic Systems >> Removal And Installation >> Wheel Speed Sensor - Front >> Removal and Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal and Installation

  1. Disconnect the battery ground cable. For additional information, refer to BATTERY MOUNTING AND CABLES .
  2. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING .
  3. Remove the wheel speed sensor bolt.
    • To install, tighten to 9 Nm (80 lb-in).
  4. Disconnect the wheel speed sensor wiring harness electrical connector.
    • Remove the wiring harness from the clips.
  5. Remove the wheel speed sensor.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals