Rear Toe Adjustment

Rear Toe Adjustment

NOTE: Air suspension vehicles must be at trim ride height prior to measuring or adjusting the rear toe.

1. Using alignment equipment and the manufacturers instructions, measure the rear toe.
^ Refer to Alignment Specifications for optimal alignment settings.
^ If the rear toe values are not within specification, go to the next step.





2. Loosen the toe link jam nut(s).





3. Rotate the toe link tie-rod to achieve the desired toe setting.

4. NOTE: Make sure the toe settings are not disturbed while tightening the jam nuts.

Tighten the toe link jam nut(s) to 115 Nm (85 ft. lbs.).
5. Recheck the rear toe setting, adjust as necessary.