Anti-Theft DTCS
POWERTRAIN CONTROL MODULE (PCM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Source | Perform Test |
|---|---|---|---|
| B1213 | Anti-Theft Number of Programmed Keys is Below Minimum | Powertrain Control Module (PCM) | GO to PINPOINT TEST A . |
| B1600 | PATS Key Transponder Signal is Not Received - Non-PATS/Encrypted Key or Damaged Key | PCM | GO to PINPOINT TEST D . |
| B1601 | PATS Received Incorrect Key-Code From Ignition Key Transponder (Unprogrammed PATS Key) | PCM | GO to PINPOINT TEST E . |
| B1602 | PATS Received Invalid Format of Key-Code From Ignition Key Transponder | PCM | GO to PINPOINT TEST F . |
| B1681 | PATS Transceiver Module Signal is Not Received (Damaged, Not Connected, or Damaged Wiring | PCM | GO to PINPOINT TEST G . |
| B2009 | CAN (J1850) Invalid or Missing Data for Vehicle Security | PCM/Transaxle Control Module (TCM) | GO to PINPOINT TEST B . |
| B2103 | Antenna Not Connected - Damaged PATS Transceiver | PCM | GO to PINPOINT TEST H . |
| B2141 | NVM Memory Failure | PCM | GO to PINPOINT TEST C . |
| B2431 | Key Program Failure (Defective Key or Transceiver) | PCM | GO to PINPOINT TEST D . |
| U2510 | Data Mismatch | PCM | GO to PINPOINT TEST B . |