LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2005 >> Freestyle SEL, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 298 (Cruise Control System) >> Removal And Installation >> Speed Control Switch >> Removal and Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver air bag module. For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM .
  2. Remove the 4 screws and the steering wheel cover.
  3. Remove the 4 nuts and the steering wheel brace.
    • To install, tighten to 9 Nm (80 lb-in).
  4. Disconnect the electrical connectors.
  5. Remove the 4 speed control switch screws and the speed control switches.
    • To install, tighten to 7 Nm (62 lb-in).
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals