LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2005 >> Five Hundred SE, AWD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel System & Engine Control System >> Removal And Installation >> Fuel Pump Driver Module (FPDM) >> Removal and Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal and Installation

    All vehicles 

  1. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .

    2. Five Hundred 

  2. Remove the rear seat cushion and the rear corner backrest. For additional information, refer to SEATING .

    3. Freestyle 

  3. Remove the C-pillar trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .

    4. All vehicles 

  4. Disconnect the fuel pump driver module (FPDM) electrical connector.
  5. Remove the 2 nuts and the FPDM.
    • To install, tighten to 5 Nm (44 lb-in).
  6. To install reverse the removal procedure.
scientia non olet · About LEMON Manuals