Programming Adjustable Pedal Positions

Programming adjustable pedal positions can be accomplished by doing the following:

• An adjustable pedal position can be stored at any time. To store the adjustable pedal position to memory, the driver must move the pedals to the preferred position using the adjustable pedal switch. The driver must then press the memory SET switch, activating the memory SET switch light emitting diode (LED). Within 5 seconds (before the LED goes out) the driver must select memory position 1.
• If no memory switch input is received within the 5 second time limit, the operation is aborted and the memory SET switch LED is turned OFF. If one of the following inputs is received during the 5 second programming limit, the operation is aborted and the memory SET switch LED is turned OFF:
  • Adjustable pedal switch
  • Power driver seat switch
  • Memory SET switch.