LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2005 >> Escape Base, 2.3 Z, 4WD, Standard >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Removal And Installation >> Power Steering Control (PSC) Module >> Removal and Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal and Installation

  1. Remove the air cleaner assembly. For additional information, refer to INTAKE AIR DISTRIBUTION AND FILTERING - HYBRID .
  2. Remove the battery junction box (BJB) bracket nuts on the strut tower.
    • Position the BJB aside.
  3. Disconnect the power steering control module electrical connectors.
  4. Remove the 2 power steering control module nuts.
    • To install, tighten to 23 Nm (17 lb-ft).
  5. Remove the power steering control module ground cable bolt.
  6. Remove the power steering control module nuts from inside the vehicle.
    • To install, tighten to 23 Nm (17 lb-ft).
  7. Remove the power steering control module.
  8. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals