LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2004 >> Mustang GT, 2D Convertible, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Electronic Engine Control System >> Removal And Installation >> Powertrain Control Module (PCM) >> Removal
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Powertrain Control Module (PCM): Removal

  1. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  2. Remove the RH front door scuff plate.
    Fig 1: Removing RH Front Door Scuff Plate
    G03241396Courtesy of FORD MOTOR CO.
  3. Remove the RH cowl side trim panel.
    • Remove the pin-type retainer.
    • Remove the panel.
      Fig 2: Removing Pin-Type Retainer
      G03241397Courtesy of FORD MOTOR CO.
  4. Disconnect the connectors and position them aside.
    Fig 3: Disconnecting Connectors
    G03241398Courtesy of FORD MOTOR CO.
  5. Remove the bolts and the bracket.
    Fig 4: Removing Bolts
    G03241399Courtesy of FORD MOTOR CO.
  6. Loosen the bolt and remove the connector.
    Fig 5: Removing Connector
    G03241400Courtesy of FORD MOTOR CO.
  7. Remove the bolt and the powertrain control module (PCM).
    Fig 6: Removing Bolt And Powertrain Control Module (PCM)
    G03241401Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals