Pinpoint Test I: DTC C1267 - Abs Functions Temporarily Disabled

I1 CARRY OUT THE RECALIBRATION PROCEDURE

Key in ON position.
Enter the following diagnostic mode on the diagnostic tool: Clear the DTC.
Carry out the ABS module recalibration procedure using the diagnostic tool.
Enter the following diagnostic mode on the diagnostic tool: Retrieve DTCs.
Are any DTCs retrieved?

Yes

If DTC C1267 is the only code retrieved, INSTALL a new ABS module. REFER to HYDRAULIC CONTROL UNIT (HCU) . REPEAT the self-test. TEST the system for normal operation.

If DTC C1267 is retrieved along with other DTC(S), or DTC(s) other than C1267 are retrieved, go to the ANTI-LOCK BRAKE SYSTEM (ABS) MODULE DIAGNOSTIC TROUBLE (DTC) INDEX .

The ABS system is operating correctly.