October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

System Specifications

Engine front cover bolts 19 Nm (14 ft. lbs.)
Crankshaft Pulley and Crankshaft Seal-Early Build
Crankshaft Pulley Bolt
Using the special tool tighten the bolt in two stages:
Tighten 45 Nm (33 ft. lbs.)
Tighten an additional 85 degrees
Crankshaft Pulley and Crankshaft Seal-Late Build
Crankshaft Pulley Bolt
Using the special tool tighten the bolt in two stages:
Tighten 45 Nm (33 ft. lbs.)
Tighten an additional 85 degrees.