Camshaft, Engine

Camshaft
Theoretical valve lift @ 0 lash - intake 12.02 mm (0.4732 inch)
Theoretical valve lift @ 0 lash - exhaust 12.67 mm (0.4988 inch)
Lobe lift - intake 7.1104 mm (0.2799 inch)
Lobe lift - exhaust 7.4979 mm (0.2952 inch)
Allowable lobe lift loss 0
Journal diameter 26.962-26.936 mm (1.0615-1.0605 inch)
Camshaft journal bore inside diameter (cap assembled) 27.012-26.987 mm (1.0635-1.0625 inch)
Camshaft journal-to-bearing clearance 0.076-0.025 mm (0.0030-0.0010 inch)
Runout a 0.09 mm (0.0035 inch)(4 places)
End play 0.027-0.190 mm (0.00 11-0.0075 inch)

a Full indicator measurement on all journals when supported on front and rear journals.





Camshaft Bearing Caps
Tighten the bolts in the sequence shown.
Tighten to 10 Nm (89 in.lbs.)