LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2004 >> Cutaway 6.0 P >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Fuel System >> Fuel System-General Information-Natural Gas >> General Procedures >> Spring Lock Couplings >> Disconnect
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Spring Lock Couplings: Disconnect

  1. Perform the fuel line venting procedure. Refer to FUEL LINE EVACUATION .
  2. Remove the fuel tube clip.
    Fig 1: Removing Fuel Tube Clip
    G02765990Courtesy of FORD MOTOR CO.
  3. Install the Spring Lock Coupling Disconnect Tool.
    Fig 2: Installing Spring Lock Coupling Disconnect Tool
    G02765991Courtesy of FORD MOTOR CO.
  4. Close and push the Spring Lock Coupling Disconnect Tool into the open side of the cage.
    Fig 3: Pushing Spring Lock Coupling Disconnect Tool Into Open Side Of Cage
    G02765992Courtesy of FORD MOTOR CO.
  5. Separate the fitting.
    Fig 4: Separating Fitting
    G02765993Courtesy of FORD MOTOR CO.
  6. Remove the Spring Lock Coupling Disconnect Tool.
    Fig 5: Removing Spring Lock Coupling Disconnect Tool
    G02765994Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals