LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2003 >> ZX2 Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System-General Information >> General Procedure >> Cylinder Bore Out-Of-Round
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Cylinder Bore Out-Of-Round

  1. Measure the cylinder bore in two directions. The difference is the out-of-round. Verify the out-of-round is within the wear limit and bore the cylinder to the next oversize limit.
    • Refer to ENGINE for the procedure.
    Fig 1: Measuring Cylinder Bore Out Of Round
    G01370857Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals