LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2003 >> Windstar Limited >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Torque Specifications
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Torque Specifications

TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Axle Shaft Hub Nut (1) 184 (250)
Brake Caliper Bolts 41 (55)
Front Stabilizer Bar link-To-Strut Nut 66 (90)
Lower Ball Joint Nut 46 (63)
Lug Nuts 95 (129)
Steering Knuckle-To-Strut Nut 85 (115)
Tie Rod End Nut 41 (55)
Wheel Hub & Bearing Retaining Bolts 85 (115)
Wheel Lug Nuts 100 (135)
INCH Lbs. (N.m) 
Anti-Lock Brake System Sensor Retaining Bolt 44 (5)
(1) Apply a small patch of Loctite 242 to the last 5 axle shaft CV joint threads, before installing the NEW axle shaft hub nut. Install and tighten the NEW axle shaft hub nut to specification in a continuous rotation. Stopping the rotation during torque procedure, will cause the nylon lock to set incorrectly. This will cause incorrect torque readings and lead to wheel bearing failure. Always install a NEW axle shaft hub nut after loosening or when the axle shaft hub nut has not been torqued to specification in a continuous rotation.
scientia non olet · About LEMON Manuals