LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2003 >> Windstar Limited >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Acceleration Control System >> Removal And Installation >> Cable Bracket >> Removal and Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal and Installation

  1. Remove the air cleaner outlet tube. .
  2. Disconnect the accelerator cable from the throttle lever.
    Fig 1: Disconnecting Accelerator Cable From Throttle Lever
    G01309307Courtesy of FORD MOTOR CO.
  3. Disconnect the accelerator cable fitting from the accelerator cable bracket.
    Fig 2: Disconnecting Accelerator Cable Fitting From Accelerator Cable Bracket
    G01309308Courtesy of FORD MOTOR CO.
  4. Remove the speed control cable. For additional information, refer to VEHICLE SPEED CONTROL .
  5. Remove the throttle return spring from the accelerator cable bracket.
    Fig 3: Removing Throttle Return Spring From Accelerator Cable Bracket
    G01309309Courtesy of FORD MOTOR CO.
  6. Remove the bolt and the stud nut and remove the bracket.
    Fig 4: Removing Bolt, Stud Nut And Bracket
    G01309310Courtesy of FORD MOTOR CO.
  7. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals