LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2003 >> Windstar Base >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Removal And Installation >> Cooler - Fluid >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Cooler - Fluid: Installation

    CAUTION: The power steering hoses and transmission fluid lines must be connected to transmission and power steering fluid cooler assembly as noted during removal to prevent power steering system and transmission failure.
    Fig 1: Installing Power Steering Fluid Cooler Assembly
    G01306419Courtesy of FORD MOTOR CO.
  1. To install, reverse the removal procedure.
  2. Fill and leak check the power steering system and transmission. For additional information, refer to STEERING SYSTEM-GENERAL INFORMATION and the appropriate group 3 transmission section.
scientia non olet · About LEMON Manuals