LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2003 >> Windstar Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 1156 (Acceleration Control System) >> Removal And Installation >> Accelerator Pedal and Bracket >> Removal
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Accelerator Pedal and Bracket: Removal

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.

    All vehicles 

  1. Disconnect the battery ground cable. For additional information, refer to BATTERY CABLES .
  2. Disconnect the accelerator pedal sensor electrical connector.
    3. NOTE: This electrical connector is present on all vehicles including fixed pedal and bracket assemblies. The electrical connector on the fixed pedal assemblies are non-working and plugged into an empty receptacle connector.
  3. Disconnect the accelerator pedal motor electrical connector.

    4. Vehicles with adjustable accelerator pedal and bracket 

  4. Disconnect the accelerator pedal motor drive cable connector.

    5. All vehicles 

  5. Remove the 3 accelerator pedal and bracket retainer nuts.
  6. Remove the accelerator pedal and bracket assembly.
scientia non olet · About LEMON Manuals