LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2003 >> Mustang Mach 1, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine-3.8L) >> In-Vehicle Repair >> FLEXPLATE >> Removal and Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal and Installation

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission. For additional information, refer to TRANSMISSION .
  2. Remove the six bolts retaining the flexplate to crankshaft, and remove the flexplate.
    Fig 1: Identifying Tightening Torque Of Flexplate To Crankshaft Bolts
    G01623714Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals