LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2003 >> Mustang Base, 2D Convertible, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal & Installation >> Computerized Engine Controls >> Powertrain Control Module >> Removal & Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal & Installation

Disconnect negative battery cable. Remove right door scuff plate. Remove pin-type retainer and remove right kick panel. Disconnect in-line connectors and position aside. Remove bolts and PCM bracket. See Fig 1. Loosen PCM harness connector bolt and disconnect PCM harness connector. Remove bolt retaining PCM and remove PCM. See Fig 2. To install, reverse removal procedure.

Fig 1: Removing & Installing Powertrain Control Module (1 Of 2)
G00096780Courtesy of FORD MOTOR CO.
Fig 2: Removing & Installing Powertrain Control Module (2 Of 2)
G00096781Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals