LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2003 >> Excursion 5.4 L, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 289 (Engine-3.9L) >> In-Vehicle Repair >> Engine Mount >> Special Tool(s)
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Special Tool(s)

WARNING: This page is about a different car, the 2003 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Special Tool(s)
G01286213Courtesy of FORD MOTOR CO.
  1. With the vehicle in NEUTRAL, position it on a hoist.
  2. Disconnect the battery ground cable. For additional information, Refer to BATTERY AND CHARGING SYSTEM .
  3. Remove the air cleaner outlet tube.
  4. Remove the upper radiator sight shield.
    Fig 2: Removing Upper Radiator Sight Shield
    G01286214Courtesy of FORD MOTOR CO.
  5. Install The Special Tools And Support The Engine.
    Fig 3: Installing Special Tools And Support Engine
    G01286215Courtesy of FORD MOTOR CO.
  6. Remove the LH and the RH lower splash shield.
    Fig 4: Removing LH And RH Lower Splash Shield
    G01286216Courtesy of FORD MOTOR CO.
  7. Remove the components in the order indicated in the following illustration and table. To remove individual components, only carry out the listed steps.
    Fig 5: Removing Components Steps Chart
    G01286217Courtesy of FORD MOTOR CO.
  8. To install, reverse the removal procedure.
    Fig 6: Identifying Motor Mount And Motor Mount Bracket (LH And RH)
    G01286218Courtesy of FORD MOTOR CO.