Rear Door Window Regulator: Service and Repair

WINDOW REGULATOR - REAR DOOR

REMOVAL
1. Remove the window control switch (if so equipped).







2. Remove the window crank handle (manual windows only).
1 Position the window crank handle cover aside.
2 Remove the window crank handle retaining screw and the window crank handle.

3. Remove the door trim panel and watershield.

4. NOTE: Do not remove the window glass from the door.

Remove the window glass from the window regulator.

5. Tape the window glass in the full up position.







6. Disconnect the window motor electrical connector (power windows only).

WINDOW REGULATOR - REAR DOOR:

7. Loosen the nuts and pull the arm from the mounting position.
8. Remove the rear door manual window regulator from the door.

INSTALLATION
To install, reverse the removal procedure.