Control Assembly, HVAC

REMOVAL
1. Disconnect the battery ground cable.







2. Remove the headlamp switch knob.
1 Remove the headlamp switch knob.
2 Rotate the headlamps switch bezel counterclockwise and remove.







3. Remove the instrument panel finish panel.
1 Remove the screws.
2 Remove the instrument panel finish panel.
^ Disconnect the electrical connectors.







4. Remove the control assembly.
1 Remove the screws.
2 Remove the control assembly.







5. Disconnect the vacuum harness and electrical connectors.
^ Disconnect the vacuum harness connector.
^ Disconnect the electrical connectors.

6. Remove the control assembly.

INSTALLATION
1. To install, reverse the removal procedure.