October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Safety Belt With Anchor Plate Thread Damage
- Remove the broken or stripped bolt and discard.
- Drill out the internal threads in the seat belt anchor plate with a 27/64-inch drill.
- Rethread the anchor plate with a 1/2-13 tap (seat belt).
- Blow out the chips.
- Install the safety belt component(s).
- Install a new bolt with the same part number, unless otherwise specified.
- Tighten the bolt(s) to specification. For additional information, refer to TORQUE SPECIFICATIONS
.