LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> ZX2 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 873 (Engine System-General Information) >> General Procedures >> Camshaft Lobe Lift >> Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Camshaft Lobe Lift: Procedure

WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use a Dial Indicator Gauge with Holding Fixture to measure camshaft intake/exhaust lobe lift.
    • Rotate the camshaft and subtract the lowest indicator reading from the highest indicator reading to figure the camshaft lobe lift.
    • Refer to appropriate ENGINE article for the procedure.
      Fig 1: Identifying Camshaft Lobe Lift
      G03919772Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals