LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> ZX2 Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - 2.0L >> Disassembly And Assembly Of Subassemblies >> Piston-Pin Connecting Rod Assembly, Press Fit >> Disassembly
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Piston-Pin Connecting Rod Assembly, Press Fit: Disassembly

  1. Use the Piston Pin Tool to press the piston pin out from the piston assembly and connecting rod.
    Fig 1: Pressing Piston Pin Out From Piston Assembly And Connecting Rod
    G02207289Courtesy of FORD MOTOR CO.
  2. Remove the connecting rod (6200) and piston rings from the piston.
    Fig 2: Removing Connecting Rod And Piston Rings From Piston
    G02207290Courtesy of FORD MOTOR CO.
  3. Clean and inspect the piston, piston pin and connecting rod. For additional information, refer to ENGINE SYSTEM-GENERAL INFORMATION .
scientia non olet · About LEMON Manuals