LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> Taurus SES, 3.0 U, 4F50N >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition Systems >> Ignition Coil >> Removal & Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal & Installation

CAUTION: It is important to twist spark plug wire boots while pulling upward to avoid possible damage to spark plug wire.
NOTE: Spark plug wires must be connected to correct ignition coil terminal.

Disconnect spark plug wires by twisting while pulling upward. Disconnect electrical connector from ignition coil. Remove ignition coil bolts and remove coil. To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS .