LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> Mustang Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - External Controls >> General Procedures >> Cable Adjustment
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Cable Adjustment

    NOTE: Make sure that the range selector lever is tight against the rearward overdrive stop.
  1. Place the transmission range selector lever in the overdrive position.
  2. Raise and support the vehicle.
  3. Loosen the manual control lever nut.
    Fig 1: Loosing Manual Control Lever Nut
    G03402384Courtesy of FORD MOTOR CO.
  4. Place the transmission manual control lever in the overdrive position.
  5. Tighten the nut on the manual control lever.
    Fig 2: Tightening Nut On Manual Control Lever
    G03402385Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals