| Connecting rod bearings clearance to crankshaft | 0.020-0.065 mm |
| Bearing wall thickness (std.) | 1.476-1.488 mm |
| Clearance of crankshaft without cylinder head desired | 0.0457-0.0660 mm |
| Clearance of crankshaft without cylinder head allowable | 0.0461-0.0859 mm |
| Clearance of crankshaft with cylinder head desired | 0.0279-0.0483 mm |
| Clearance of crankshaft with cylinder head allowable | 0.0276-0.0674 mm |
| Bearing wall thickness | 2.117-2.129 mm |
| Connecting rod piston pin bore diameter | 20.570-20.610 mm |
| Crankshaft bearing bore diameter | 46.89-46.91 mm |
| Out-of-round limit - piston pin bore | 0.008 mm |
| Taper limit piston pin bore | 0.0038/25.4 mm |
| Length (center to center) | 131.905-131.975 mm |
| Out-of-round-limit- bearing bore | 0.010 mm |
| Taper limit - bearing bore | 0.010 mm |
| Alignment bore-to-bore (max. differential) twist | 0.05 mm |
| Alignment bore-to-bore (max. differential) bend | 0.038 mm |
| Side clearance (assembled to crank) standard | 0.092-0.268 mm |
| Side clearance (assembled to crank) service limit | 0.356 mm |