| Connecting Rod Cap Bolts | Stage 1: | | 25 Nm (18 ft.lb) |
| Stage 2: | | 45 Nm (33 ft.lb) |
| Stage 3: | | Additional 90-120 degrees |
| Connecting Rod Journal | Diameter | | 58.682-58.702 mm |
| Out-of-Round Limit | MAX | 0.008 mm in 45 degrees |
| | TOTAL | 0.015 mm |
| Taper Limit | | 0.008 mm per 25 mm |
| Surface Limit (RMS) | | 0.3 micrometers |
| Connecting Rod | Piston Pin Bore Diameter | | 22.94-22.98 mm |
| Crankshaft Bearing Bore Diameter | | 61.535-61.655 mm |
| Out-of-Round Limit - Piston Pin Bore | | 0.003 mm |
| Taper Limit Piston Bore | | 0.003 mm per 25 mm |
| Length (Center-to-Center) | | 154.66-154.74 mm |
| Alignment (Bore-To-Bore Max. Diff) | Twist | 0.059 mm per 25 mm |
| | Bend | 0.04 mm per 25 mm |
| Side Clearance (Assembled to Crank) | Standard | 0.11-0.49 mm |
| | Service Limit | 0.36 mm MAX |