LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Focus LX, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 218 (Supplemental Inflatable Restraint System) >> Removal & Installation >> Passenger-Side Air Bag Module >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Passenger-Side Air Bag Module: Installation

WARNING: This page is about a different car, the 2003 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse removal procedure. Tighten air bag module mounting bolts to specification. See TORQUE SPECIFICATIONS  . Remove air bag simulator from passenger-side air bag module harness connector and reconnect connectors.
  2. Connect negative battery cable. With air bag simulators installed at all remaining deployable devices, perform system operation check. See SYSTEM OPERATION CHECK  . Activate air bag system. See ACTIVATING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM.
scientia non olet · About LEMON Manuals