Camshaft Position Sensor: Service and Repair

REMOVAL
1. Disconnect the battery ground cable. For additional information, refer to Battery.







2. Disconnect the electrical connector.







3. Remove the Camshaft Position (CMP) sensor.
^ Remove the bolt
^ Remove the CMP sensor.

INSTALLATION
1. Lubricate the O-ring seal lightly with Super Premium XO-5W-30-QSP Motor Oil or equivalent, meeting Ford specification WSS-M2C153-G. Position the CMP sensor.

NOTE: Inspect the O-ring seal for damage; install a new seal if necessary.







2. To install, reverse the removal procedure.