LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Contour LX, 2.0 Z >> Repair and Diagnosis (Single Page) >> Brakes >> Anti-Lock/Traction Control >> Bleeding Brake System >> Pressure Bleeding
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Pressure Bleeding

  1. Disconnect negative battery cable. Clean dirt from around master cylinder reservoir cap. Disconnect low fluid level warning light switch electrical connector. Remove reservoir cap and fill master cylinder reservoir with clean DOT 3 brake fluid.
  2. Connect Pressure Bleeder (104-00064) and bleed brake system using manufacturer's instructions. Ensure master cylinder reservoir if filled to MAX position.
scientia non olet · About LEMON Manuals