Connecting Rod
| Connecting Rod-Piston Pin Bore Dianeter | 22.012-22.024 | |
| Connecting Rod -To Piston Clearance | 3.10-4.00 | |
| Connecting Rod-Crankshaft Bearing Bore | 56.866-56.886 | |
| Connecting Rod(Center To Center)Length | 5.93 | |
| Alignment-Bore to Bore | +/-0.05 mm >Pin Bore And Crank Bearing Bore Must Be Parallel And In Same Vertical Plane Within The Specified Total Difference When Measured At The Ends Of A 203mm (8.12in) Bar, 105mm (4.06in) On Each Side Of Rod Centerline,-Twist mm(inch). | |
| Alignment-Bore To Bore-Max Diff | +/-0.038 | |
| Side Clearance-Assembled To Crank-Standard | 0.0006-0.0117 | |
| Side Clearance-Assembled To Crank-Service Limit (MAX) | 0.02 | |
| Connecting Rod Bolts | Stage 1 | 30-33 |
| Stage 2 | Rotate 90-120 Degrees |